Higher energy prices are hurting us all, Click here

Visit our YouTube channel at http://www.youtube.com/user/OehlertBrosInc

Even with regular heating system maintenance, you may eventually need a boiler repair service or even a boiler replacement in order to maintain indoor comfort in your home. There are certain signs to look out for that indicate it’s time to consider replacing you heating and cooling equipment, or improving the performance of your overall system. If the following indicators are present it may be time to call a professional contractor to help you with your appliance.

Your HVAC system and hot water heating accounts for 60% of your home’s energy usage!

During the cold winter months, to keep warm homeowners turn on their home heaters. You can save energy when heating your home by taking the time to winterize for maximum energy savings. Due to the increasing energy costs, winter heating will consume an increasingly larger portion of a household’s energy budget.

Keep the following tips in mind as you begin to winterize your home.

Check for Leaks

Check Your Home’s Insulation

Check Your Heating System

Making sure your tankless water heater is properly installed and maintained will optimize its energy efficiency, especially since water heaters are one of the many appliances we rely on every day. Whether gas or electric, they are generally very dependable and quiet. A tankless water heater can last for a decade or more, and save you money as long as proper annual maintenance is performed.

Proper installation of your tankless water heater depends on many factors, so it is important to have a qualified and licensed plumbing and heating contractor install your tankless water heater. Before selecting a contractor request estimates in writing, obtain references, check the company with your local Better Business Bureau, and make sure they have a proper permit.

Tankless water heaters are now designed to last 20- 30 years. This is done by owning a high quality water heater, and by preforming a little maintenance on it. Without maintaining your tankless water heater investment you might only get half that time.

Water qualities are different all over the country, and even good water has minerals in it that over time will build up on the interior walls of the tanks heating chambers. The industry standard recommendations are once per year turn the tankless water heater off, and flush out with white vinegar and water using a submersible water pump to remove the calcium deposit buildup. You can find submersible water pumps at most home improvement and hardware stores.

The steps to take to perform your annual tankless water heater maintenance are:

Buderus solar is one of the largest and most reputable manufacturers in the world. They have been manufacturing and designing solar water systems for over 25 years, and continue to invest in research and development to bring innovative, high quality, solar products to the market.

A Buderus solar thermal system for hot water consists of a solar collector, a pump station, and an indirect hot water storage tank. The solar collector, which is located on the roof, collects the sun’s energy and transfers the heat to the storage tank via the tanks internal heat exchanger. The storage tank in turn allows the hot water to be stored until it is used. The controller activates the system’s pump when there is enough solar energy to create hot water. Even on a cloudy day, light penetrates the cloud layer and heats up the solar collectors.

An existing Buderus wall hung or floor standing boiler can be combined into the solar system as a back-up for domestic hot water. The solar system can also complement the boiler for space heating by reducing the number of boiler starts, saving on costly fuel.

A typical Buderus residential solar hot water system using 2-4 collectors takes about 1-2 days to install depending on location and roof type. Larger commercial systems take longer because of the scale, equipment, and labor required. The typical life expectancy of a Buderus solar hot water system is 20-30 years. If the system is properly maintained, it can last over 30 years. Every 5 year, the heat transfer fluid should be checked and replaced. The pipe insulation and controller settings should also be checked as part of the annual system check-up.

A residential solar water heater will offset greenhouse gas emissions by about 1,600 pounds of carbon dioxide (CO2) per year. That’s equal to the amount of CO2 released by an average vehicle every 1,700 miles!

You can get your home ready for the winter season by tackling easy and inexpensive projects that will save you money in heating bills in the long run. Here are a few simple winterizing suggestions to help you prepare your home and your wallet for the cold weather months.

Furnace Tune-Up

Contact a local HVAC company to have your HVAC system serviced. Make sure they inspect the duct system for leaks, as this can cause warm air to leak outside instead of being distributed throughout your home.

Some do-it-yourself tune-up improvements include:

Check Your Attic Insulation

Insulating your attic reduces unwanted heat loss out of your home during the winter months and air conditioning in the summer months. A quick way to determine if you need more insulation is by looking at the floor joists. If the joists stick up past the insulation levels, you probably need more. If the joists are hidden under the insulation, your attic is thoroughly insulated.

In addition to checking insulation, weather-strip and insulate your attic hatch or door. Seal up holes in the attic that lead down into the house such as open wall tops and ducts, and plumbing or electrical runs. Any hole that leads from the basement or a crawlspace to the attic is a big energy waster.

Close Off the Chimney

If you wish to close off your chimney, install glass doors or inserts to keep the heat from getting sucked out of the house. If you are going to use your fireplace, hire a chimney sweep to clean it out annually and inspect the damper for proper opening and closing to minimize the chances of heat escaping.

Seal Doors & Windows

Using weather stripping around doors will prevent cold air from entering your home. As you check all of your exterior doors make sure the weather stripping is intact. If the weather stripping has deteriorated or is non-existent, install it on the sides and top of the door. The bottom of every exterior door should have a sweep running along the bottom.

Make sure all double hung windows are pulled up. Sometimes the top half may slip down unknowingly if the catches are not securely locked. If you have a basement, consider protecting its window wells by covering them with plastic shields.

When your central heating and cooling system is in its best condition, it provides a great mix of efficiency and comfort. On the other hand, if it is left without proper maintenance, that efficiency crashes and so does your wallet.

Most maintenance for central heating and cooling systems should be left to the professionals, but some general upkeep can be performed by homeowners of any skill level. Here’s a list of suggested maintenance for central heating and cooling systems to ensure you keep the cost of comfort at its lowest.

Central Cooling

Air filters:

Air filters on central heating and cooling systems block dust, pollen, and other small particles from entering your home. Eventually, these air filters become clogged by these particles, causing a reduction in energy efficiency from 5 to 15 percent. Ignoring air filter maintenance is like throwing away the money you spent on a better unit. The U.S. Department of Energy recommends that filters be replaced every one to two months during the season. Some central air conditioner filters are reusable while others are disposable. Before you replace your air filter, check to see which kind you have.

Clogged drains:

Central air conditioners feature drains used to remove condensation and humidity. These can become clogged over time. Unclogging the drains is simple. Just push a wire through the drain channels to knock out the gunk.

Expert Level Central Cooling Maintenance

Other maintenance should only be done by professionals or homeowners with advanced knowledge. These include:

Cleaning coils:

The evaporator and condenser coils collect dirt overtime, limiting air flow and the amount of heat removed by the air conditioner. These should be cleaned, at most, every year.

Coil fins:

Fins on the evaporator and condenser bend over time, which blocks air flow. When this occurs, the fins should be straightened.

Blower adjustment:

The blower may wear down over time and need an adjustment to boost air flow.

Adjust refrigerant:

If your air conditioner has too much or too little refrigerant, an essential chemical component that creates cool air, your system will operate inefficiently.

Central Heating

Air filters:

A furnace relies on a filter to block out dust, mold, and other particles, which collects dirt over time, leading to falling energy efficiency. Your filter should be changed regularly, as much as once a month during seasons when it’s in constant use. A filter change takes just a few minutes.

Pilot light:

If you have natural gas, check whether the pilot light is on and that it’s blue. If you’re trying to heat your home but getting nothing except cold air blowing in, a pilot light that’s gone out is the likely problem. If the pilot light is yellow or orange, there may be a mechanical issue with the system.

Expert Level Central Heating Maintenance

Other maintenance should only be done by professionals or homeowners with advanced knowledge. These include:

Belt adjustment and lubrication:

Belts inside your central heating dry out and become worn over time, this reduces efficiency. These should be adjusted and lubricated, at the most, annually.

Interior cleaning:

Dirt will inevitably end up in your central heating, requiring a professional cleaning. Nearly all elements of the furnace must be wiped down and cleaned out. A dirty furnace can significantly reduce efficiency. Get a contractor to clean your furnace every few years.

Heat pumps have had a poor reputation for providing optimum comfort in a home due to the low temperature air that they generate at the supply vents. Oil-fired and gas-fired furnaces provide heated are that is 15 to 20 degrees warmer at the supply vents. Often a hybrid heating system can be installed that uses either heating oil or natural gas as a back-up when temperatures are at the coldest during the winter months.

Heat pumps work best in well‐insulated and well‐sealed homes. The ducts must be tactically placed to collect cool air in the winter and hot air in the summer. When you operate a heat pump make sure to find a comfortable setting and leave it alone. It is recommended to place the settings of the heat pump at 68°F in the winter, and 78°F in the summer. If the thermostat is adjusted frequently in the winter, auxiliary electric heat can be activated which can contradict the efficiency of the unit. In addition, change the filters regularly to a MERV rating of 6 or greater. If you preform the basic maintenance procedures it will help your unit to run at its optimum capacity.

Heating an old house is a balancing act often met with trouble. Many early homes were built without any type of central heating system (unless you count the chimney) meanwhile others are faced with aging, and incompetent systems.

Unless you are planning to remodel your house, you probably have no other choice in the matter but to deal with systems such as these: existing steam or hydronic radiators powered by a broiler, or forced air ducts fueled by a furnace. Even if you don’t intend to tear out your floor, there are ways to incorporate new technology that will make your system more competent, and more comfortable to live with.

Landowners have long complemented central heating systems with wood or gas burning fireplaces, stoves and inserts. These often proficient components may boost warmth in a gathering room or even heat a small house at prices that make sense to most homeowners, but there are plenty of other choices that can resolve heating problems or increase comfort in chilly spots like entries, porches, and bathrooms.

One Choice Preferred:

Got a steam or hot water system with indisposed radiators?

No need to throw out the boiler with the bath water when you replace the broken one with a new one. Choices can consist of nearly silent baseboard units that melt into the wall, flat-fins units that tuck under windows, or streamlined tubular radiators that look like the originals you may already have.

Want to know more about better heating your home? Get in touch with Oehlert Bros. to find out how!

There are plenty of online companies that provide either one or the other type of natural gas service plan. But do you really know that many of these programs do not turn out to be the best service program for the natural gas. There’s usually too much of advertising and web advertorials and infomercials on the best natural gas service plan, but hardly any program turns out to be the best. Therefore, in such a situation it becomes very necessary that you search for the best natural gas service plan.

Here are few important things to make note of when searching for the best natural gas service plan:

Tanksure Program is a comprehensive and visual inspection of the above ground residential fuel oil storage tanks. The program involves ultrasonic testing of the tanks for finding any possibilities of leaks or any crack in the fuel tank that might turn out to be hazardous situation for the home owners. The test performed under Tanksure Program makes use of EPA approved technology and all it takes is just 10 minutes. The test is performed by trained service providers who have plenty of experience in conducting the Tanksure program and can also find the leaks or cracks in the residential fuel oil storage tanks.

The benefit of Tanksure program includes:

When hiring the service provider for a Tansksure program, it is very necessary that you make it sure that the service provider is experienced and moreover it has the knowledge and education in fuel oil tank repairing. You can easily find experienced fuel oil tank service providers in Air Conditioning Repair Oil Bucks County, Montgomery County and many more. If you are taking quick decision to find the service provider for Tanksure program, just stop now as this will harm you more than doing any good. The Tanksure program is not to be meant for use by a novice service provider by any means.

The very success of Tanksure Program will depend on the experience of the service provider. In most of the cases where trained service providers execute the program, the task is consummated within a matter of 15 minutes and no more. For the less trained service providers this task can take up to 20 minutes or even more. The thing that matters most is the experiences, and once the professionals having the right experience comes in, rest is just a story.

Tanksure Program is one complete security for fuel tanks installed in the homes. The program keeps a thorough check on the integrity of the fuel oil tank and makes it sure that no leaks develop over a period of time. If you have a fuel oil tank installed in your home, then the best thing that you can do is to hire an experienced fuel oil tanks service provider who can provide you with Tanksure program designed to make the fuel oil tank completely leak proof.

If you are delaying your decision to go for Tanksure Program, then there are possibilities where you can have real big problems and moreover it can turn out to be hazardous for your family. Make sure that when you go for the Tanksure Program, there’s always something extra that your fuel oil tank will get at your home.